Menu
Cart 0

Your requirements

1. What are the dimensions of the room / areas that you want to cover in metres?
X
2. What are the dimensions of the windows / areas that you don't want to cover in metres?
X
3. How many doors in the room?

Wallrock Dampstop Thermic Roll 67.5cm Width 7.5m Length (5m2)

Victory Colours

  • £945


Wallrock Dampstop Thermic Roll 67.5cm Width 7.5m Length (5m2)

FREE Next Day Delivery for Orders Over £50.00

Order NOW!

NEW & IMPROVED!

Wallrock Dampstop Thermic Roll 67.5cm Width 7.5m Length (5m2) - Wallrock Dampstop Thermic is a completely new and technically superior product compared to the original Wallrock Dampstop.  Dampstop Thermic has ZERO paper content, ZERO tar content and is available at a very competitive price!

Wallrock Dampstop Thermic uses a very tough, strong, rot-proof and salt resistant polypropylene backing bonded to a water resistant composite metallic barrier. This will give a long service life even in very challenging conditions. 

Each roll covers 5m2 and comes in extra wide widths of 675mm to make containment of damp problems easier.

The rot-proof backing can be applied directly to the wall with our Wallrock Dampstop Thermic Adhesive.  This blocks the appearance of unsightly penetrating damp and staining. The metallic surface can then be either: painted; covered with thermally efficient wallcoverings such as,  Wallrock Thermal Liner, Wallrock Cosy Liner and Wallrock Thermal Liner KV600; Paste-the-Wall lining papers, or decorative paper such as Anaglypta.

We strongly recommend that the Wallrock Dampstop Thermic Adhesive is used for further decoration for the best results.

Why Use Dampstop Thermic?

Not only does Dampstop Thermic stop unsightly damp and associated stains, it also greatly enhances the reflection of heat into a room if the composite, thermic, metallic surface is left exposed - making this product particularly useful in improving energy efficiency  when used behind radiators and appliances.

As a rule of thumb 1-2kgs of mixed adhesive is required for each standard roll of lining paper. Use Dampstop Thermic Adhesive which is recommended for this product which is available to buy on our website.

  • TOUGH AND DURABLE
  • COMBATS PENETRATING DAMP
  • HEAT REFLECTIVE PROPERTIES
  • REDUCES HEAT LOSS
  • PASTE THE WALL

     

    Length: 7.5

    Width:  675cm

    Coverage: 5m² approx

    As a rule of thumb 1-2kgs of mixed Dampstop Adhesive is required for each roll of Dampstop Thermic paper. 

    Please note

    Wallrock Dampstop Thermic will help alleviate the appearance of penetrating damp on internal walls but we always recommend the root causes are also investigated and dealt with. For example penetrating damp can be caused by blocked gutters and downpipes, poor external wall condition, failing damp proof course and other local factors.

    Instructions for applying Wallrock Dampstop Thermic as a damp barrier

    This product has been developed to combat  areas of penetrating damp that can discolour wall decor. If the whole wall is not being covered in Wallrock Dampstop Thermic, ensure the product extends a minimum of 500mm from the damp area for best results.

    1. Remove loose or flaky material from the wall surface as well as any projections that may rupture the Wallrock Dampstop Thermic, fill any holes with a suitable filler. The surface may need priming if excessively porous or absorbent, we recommend diluting Wallrock Dampstop Adhesive 1:1 with water to form a primer, allow to dry thoroughly.
    2. Brush the adhesive onto the wall over a slightly wider area than the Wallrock Dampstop Thermic strip - you will need typically 160-250ml per square metre depending on the condition of the wall. The adhesive must be applied evenly.
    3. Apply the Wallrock Dampstop Thermic directly to the pasted surface - black side to the wall.
      NB. Using a wallpaper hanging brush carefully remove any air bubbles, brushing from the centre outwards, ensuring there are no wrinkles or air pockets remaining as they will not dissipate during the drying process.
    4. When applying multiple lengths we recommend butted joints are used as follows;
      Ensure Wallrock Dampstop Thermic Adhesive is applied liberally and evenly at the butt joint to reduce the possibility of damp tracking through seams. This technique is adequate to combat small localised damp problems.
    5. In the event the maximum possible damp resistance is required we recommend 2 layers of Wallrock Dampstop Thermic are applied being careful to ensure the seams are offset with the layer beneath.
      Alternatively extra resistance can be achieved by applying  a single layer but overlapping at the seams by minimum 20mm. It is important to note that with this technique the contours of the overlap are likely to remain noticeable even after painting or overhanging with wallpaper.
    6. Once complete allow to dry thoroughly - 48 hours may be sufficient but much longer may be required as the foil surface will slow down the drying process.
    7. Once thoroughly dry, we recommend the treated area is thoroughly checked to ensure the Wallrock Dampstop Thermic is fully bonded. The Wallrock Dampstop Thermic foil surface can simply be painted (the surface may need priming, please ask the paint manufacturer), overhung with lining paper, insulating wallpaper or a decorative wallpaper.

    For application of wallcoverings to the foil surface use only Wallrock Dampstop Thermic Adhesive.

    *Please note; the foil surface is not suitable for most types of alternative adhesives. When overhanging with an additional wall covering you should continue to use the Wallrock Dampstop Thermic Adhesive and not an alternative paste, even if a specific product recommends it.
    Other important advice and tips;

    When applying lining paper over Wallrock Dampstop Thermic it can be applied at right angles to the Wallrock Dampstop Thermic which will guarantee seams cannot correspond with those in the Wallrock Dampstop Thermic - we strongly recommend our reinforced linings such as Wallrock Fibreliner. Applying an Insulation Liner over the Wallrock Dampstop Thermic such as Wallrock Thermal Liner, or Insulating Lining Paper Graphite+ will add a noticeable insulation effect and complete the transformation of your damp wall.

    Instructions for applying Wallrock Dampstop Thermic as a Thermal Reflector

    Application is exactly the same but the reflective surface works most efficiently when not covered with another wallcovering or paint. This makes the product ideal for application behind heat sources such as radiators and household appliances, where it will ensure heat that is partially absorbed by the wall is reflected into the room.  The product has an A1 non-combustible core.

    Warning: Take care not to allow this product to come into contact with live wires both during and after hanging, especially important because the aluminium Thermic foil is conductive.

    As a rule of thumb 1-2 kgs of mixed Dampstop Adhesive is required for each roll of Wallrock Dampstop Thermic. 

    FREE NEXT DAY DELIVERY

    To qualify for FREE next day delivery simply spend £50.00 or more on any products, this covers all standard UK areas.  Orders need to be placed before 12 noon to qualify for anytime next day delivery (working days only). The standard delivery charge is £4.99 on orders under £50.00

    Standard UK areas exclude Highlands of Scotland, Offshore Islands of Scotland, Northern Ireland, and Eire. We can still deliver to non-standard areas but it may take a little longer and be more expensive.

    If you have any queries please contact the sales office on 01258 841310

    Specified Delivery Costs

    If you require specified delivery times the prices are as follows:

    • before 1200hrs - £10.99 
    • before 1000hrs - £14.99 
    • before 0900hrs - £19.99

    Saturday Delivery - UK Mainland Only

    Saturday delivery will incur an extra cost.  Please place any order you require to be delivered on Saturday before 12:00 on Friday.

    • Delivery costs on orders below £100 - £12.99
    • Delivery costs on orders over £100 - £8.99

    Your requirements

    1. What are the dimensions of the room / areas that you want to cover in metres?
    X
    2. What are the dimensions of the windows / areas that you don't want to cover in metres?
    X
    3. How many doors in the room?

    We Also Recommend